Standard bigHead selector
A standard bigHead is a fixing welded to a head, available in mild steel or 316 stainless steel. We have over 400 standard bigHeads available at short notice. Follow the 3 steps below to select the one you need.
If your selection is not available as a Standard bigHead then please use Build your own bigHead to tell us what you need. If you need something really different please take a look at Special bigHeads and send us a sketch of your design.
Our standard bigHead product list is also available as a print-friendly page.
Step 1 – Select your fixing type
Male Threaded Stud
Female Threaded Collar
Female Threaded Nut
3mm Diameter Nail
4.75mm Diameter Plain Pin
Cable Tyrap
45 Degree
12.25mm Loop
45 Degree
19mm Loop
90 Degree Loop
90 Degree Hook
Step 2 – Select your head type
38mm Diameter
38mm x 15mm Rectangle
32mm Square
15mm Square
23mm Diameter
30mm Diameter
40mm x10mm Rectangle
20mm Diameter
58mm Square
50mm Diameter
19mm Diameter
Step 3 – Select your material
To order please call us on 01202 574 601 or e‑mail.
Cannot find the combination you need? Please try Build your own bigHead or call us for assistance.
Need something really different? Take a look at Special bigHeads and send us a sketch of your design.
Click on these links for the maximum Tensile Load values and maximum Torque values for bigHeads.
If you need an imperial thread, like UNC or UNF, please contact us.