 |
Poppit Step by Step Installation Guide |
<< back |
|
|
 |
|
|
|
|
Fix your panels in 4 easy steps using bigBond self-adhesive pads:
Preparation: Remove dust, dirt, oil or grease from both surfaces, ensuring they are clean and dry.
| Step 1 |
Step 2 |
Step 3 |
Step 4 |
 |
 |
 |
 |
| Stick the pad onto the Poppit. |
Stick the Poppits to the panel. You can stick either the male (steel) or female (plastic) side to your panel. The pads should bond the Poppits instantly. |
Stick the pad onto the Poppit. |
Press the panel to the wall with even pressure. 70% of the full sticking power is reached after 1 hour and full strength after 24 hrs. |
Fix your panels in 4 easy steps using BigBond glues:
Preparation: Remove dust, dirt, oil or grease from both surfaces, ensuring they are clean and dry.
| Step 1 |
Step 2 |
Step 3 |
Step 4 |
 |
 |
 |
|
| Apply the glue to the panel. |
Stick the Poppits to the panel. You can stick either the male (steel) or female (plastic) side to your panel. Make sure the glue has cured before proceeding to step 3. |
Apply the glue to the Poppit. |
Press the panel to the wall with even pressure until the glue is cured. As glues can take time to cure, we recommend holding the panel in place with a prop. |
|
 |
|
